Is It Time For A Blown Double Glazing Repair?
Condensation is an indication of blown double glazing. This is when the seal between the two panes of glass has been broken, allowing inert gas to escape.
Having your double glazed windows repaired is crucial. It will not just save you money and cut down on the noise outside however, it will also restore the insulation properties of the window.
Seals that have been damaged
The window seals of double-glazed systems are responsible for forming an airtight and watertight. This keeps the warm air in and cold out. These seals can be damaged and cause drafts, windows that are misty, and energy loss. If your windows are starting to show signs of damage to the seals, then it's time to consider a repair or replacement.
You will notice condensation between the glass panes in the first sign. This is due to the fact that the inert gas inside the sealed unit breaks down allowing warm air from outside to enter your home. If this happens, the window needs to be replaced because the inert gas isn't repaired.
A dark, mouldy look on your window frames or windows is a different sign. This is usually an indication that the seals have broken and moisture is leaking into the frame. This could lead to the timber becoming soft as well as peeling and warping of the paint. Once the window is replaced, any moisture within the frame will be eliminated and you will be able to regain the original efficiency of your heating system.
If you decide to get your windows repaired or replaced you should also consider upgrading your double-glazing to an A-rated energy efficient glass because this will further increase your thermal efficiency and reduce your energy bills. You can find out the energy efficiency of your existing windows by contacting the manufacturer you purchased them from or by searching on the internet.
A drafty window can be a sign that your window seals are damaged or have been blown. If the window is still able to keep the cold out it can be worth having the seals replaced as soon as you can, as this will enhance the overall performance of your windows.
You can test your window seals by rubbing the edge of your glass with the help of ice. If the window becomes cloudy and you are unable to wipe it away then the seals are most likely to be broken. It is important to take action quickly since it could affect the insulation of your double glazing, leading to higher energy bills.
Water Leaks
Double glazing is a good investment that will pay off in the long run. It will add warmth to your home as well as reducing noise. It also increases energy efficiency. It's not a surprise that homeowners experience issues with their windows. One common issue that can lead to a double glazing replacement is condensation between the panes. This can cause your windows to appear dirty or more importantly, let water into the property.
Water vapour condenses onto cold glass, forming moisture which can't be removed. This is a natural occurrence that occurs when temperatures drop in the evening, or when the windows are left exposed to weather conditions that are wet such as heavy dew. This problem can be resolved by ensuring your home is adequately ventilated and by using humidifiers in every room susceptible to moisture accumulation.
If your double-glazed window is leaking and you are unable to wipe the moisture off then it is likely that the unit has blown away as this is the only way that water gets into the double glazed unit once the gas has evaporated. Some companies claim to be able to repair double-glazed units that have mist by drilling small holes in the glass and injecting chemicals into the holes. These chemicals absorb moisture from the unit. This can remove the fog or condensation in a short amount of time, but it's a temporary fix that has to be repeated.
It is irreversible once a sealed unit blows. Your double glazing will have to be replaced as it will not have the same thermal insulation properties it had when new. Contact the company that installed your double glazing to find out if it is still under warranty. In this instance they will either extend the warranty or provide you with a discount on the cost of replacing the unit.
Many online stores sell an easy kit that can be used to fix misted double glazing. This involves drilling small holes in the glass, then spraying a specific resin in the gaps to stop water from entering through. This is a more permanent and cost-effective solution, but it should be carried out by someone who has the required experience.
Deterioration
If the seals in your double glazing aren't working as they should, moisture can get into the space between the window panes, which will cause them to become misty. This can result in the windows losing their effectiveness because they are no longer able to keep cold outside and the warm inside.
Depending on your circumstances Misting can also lead to water forming inside of your double glazing. This could cause damage to the frame, and when left unchecked, it can cause water leaks and even mould growth inside your home.
The misting might not be as bad as it sounds and it's a good idea to contact your installer in the event that your windows are under warranty to see whether they are able to assist with the repair or replacement costs. If they're not covered by warranty, you'll have to seek out a professional to make the repairs.
A professional will be able to replace your damaged double-glazed windows to restore their thermal efficiency as well as removing the condensation buildup. It is crucial to fix the windows immediately you notice the misting as it will reduce the cost of energy and stop moisture entering your walls or plaster which could cause major damage.
In addition to restoring the performance of your double glazing, a blown double glazed window repair will ensure the safety of your family members and pets. Window repairs that are blown often have large gaps between the glass, which are not a great place for animals and children to play with. A professional will be able to pressure equalize the unit by drilling two tiny holes and will then use silicone sealant to restore the seal of your windows.
You should check if your double-glazed windows are covered by a warranty. If you are unable to find any contact information, you might be able claim some of the cost of installation. It is worth checking if your windows are covered by a lifetime warranty. Contact your provider immediately if you notice any issues with your double-glazed windows. You can contact them by telephone or in person. If you are able you can follow up with your call with a written note.
Poor Insulation
Double glazing is a great investment that will bring warmth to your home and block out outside noise. They also provide an excellent improvement in energy efficiency and insulation for any home. However, as with any home improvement project, there are always potential problems that can arise. One of these is when your double glazed windows begin to fog. Misted windows are unsightly and can ruin your neat aesthetics. A build-up of moisture is an ill-health risk. This can be addressed with an expert double glazing repair .
If your double glazing has developed a condensation buildup it is likely that the gas cavity between the glass panes has developed an air leak. This means that the inert gases have evaporated and warm air can get into your home. This is a serious issue that needs fixing, as the double glazing will not be able to perform its function, and your home will become colder as a result.
This is a normal phenomenon that happens at night or in the early morning hours when temperatures drop and dew forms. It's nothing to worry about and is a result of your windows operating exactly as they ought to.
Moisture on the inside of your double-glazed windows is a different issue. This is often caused by poor ventilation and humidity levels in your home. Utilize extractor fans to decrease humidity in bathrooms and kitchens. Also open your windows often to let fresh air circulate.
Fortunately, the majority of the time, your blow-up double glazing repair will involve replacing the damaged window. A skilled tradesperson will first examine the condition of your frame and ensure that the proper measurements are taken to ensure that when a brand new window arrives it will be cut to the correct size. They will then take out the window they have replaced with a new one, making sure that all seals are properly installed to stop the entry of moisture into your home.